Please download the example program from the link below. You will need to have the ITScriptNet software installed to your computer in order to run this program. This program will run in ITSriptNet versions 3.1a and later.
This example demonstrates the use of an on-screen tap button to Send/Transfer the collected data from the device, along with a display message to alert the user that there remains collected data yet on the device.
In addition, this program also contains script which will allow the mobile device to be placed/seated into a cradle (or connected by a USB communications cable). This script is located in the Program Events (under the Program menu), and will automatically check for a USB Sync status with the computer. Where there is collected data on the device and the USB Sync status is active, the example program will automatically transfer all collected data to the computer. However, please note that this latter feature requires that the user be patient and wait up to a full minute in order for the USB Sync to connect and the data to transfer, before removing the device from the connection.
This program can be opened in the ITScriptNet developer software in order to view the script behind the buttons and in the Program Events.